Newelectronx Reviews, Rating, and Feedback

I've had my scuf for about 10 month now, and average about 1 to 3 hours a day of play. I'm very careful with the controller, don't abuse it when using it and store it in a box up high so my dog or brother can't accidentally knock it off the end table. recently I've noticed the right stick feels very sketchy. After opening it and inspecting I found grit in the analog stick area. Used canned air to blow it out and a bit of contact cleaner. Seems to work better after putting it back together.

my scuf is about 4 months old and my paddle broke. Totally my fault but now where the screws go the area is stripped. mysteriously my scuf key wouldn't take out the screw. bought this tool box for my classic gaming collection and you wouldn't know? one of the screwdrivers took off the stripped screw from a scuf 4ps.

anti vandal bit set inserts are of excellent quality and include a good assortment of tamperproof bits, especially the screwdrivers for video gaming consoles. The carrying case is very nice and keeps the bits in place securely while allowing for easy retrieval. the handle is exceptionally nice and works great with the magnetized bit drivers - keeps them in place. allot of hard to find screws heads are packed in this tiny little box for a decent price. the discount coupons really make this bargain buy and for what it consists of a steal of a buy. i felt leaving review was necessary since i practically robbed the place and got the screwdriver tool box for peanuts.

Not only did this screwdriver set help my husband and I repair the coffee and espresso machine. It also helped us save some precious memories recorded on an older video recording system. there were various recordings like my son's band performance, choir concerts, Christmas parades, and birthdays. The tape was stuck and wouldn't eject even when we found and pressed the reset button. Amazingly this tool box had a screwdriver small enough to fit the small fasteners on the camera. After removing all the little screws successfully we were able to remove the jammed cassette tape. This saved us $25.00 which the repair guy just wanted to look at it and another $83.00 if he could fix it. Now the camera is working again and playing all of our memories and we didn't have to spend extra money to solve the problem.

After the quick delivery, all of bits I've used and looked at seem to be quality made and I have no complaints.

There different manufacturers who sell 100 piece anti vandal bit sets for under $13.00 The problem is, after reading the reviews most say stripped after first use, holes are off centered, holes aren't drilled in the inserts. Looking for something I could actually use and count on to work. Using this set several times now with a reasonable amount of torque, I am satisfied with this set.

This is one of my top sellers. Awesome product!!

i would recommend this to anyone looking for a good set of screwdriver in a set with external tri-wing screw drivers. use it everyday. its very handy to have the handle, it can put bits in 3 places. t-handle gives stronger turning leverage than a conventional screwdriver handle. it also have the screwdriver with a #2 phillips tip which i use often. i've used the extension to make the driver longer or smaller depending on what i'm doing. it is now my tool set of choice, whether for flat tip,phillips,hex,torx tips,or gamebit which all came quickly in the mail 3 days after ordering. i would recommend.

as a telephone television cable contractor, you've got to be ready for the better money that comes from a triple play. wiring the whole house with phone, cable, and internet sometimes requires proprietary star keys. that's why it pays to be ready to make money off these bigger jobs. this set saved me the headaches of being without the correct television installation star key pattern. a must have set for making the worst day better.

Before owning this tool set, my machine was making coffee, but the frother/steamer would not dispense any hot water or steam but i could hear the pump working. water would end up in the dispensing tray. followed some rather simple instructions i found online referring to the steam clogged valve. i cleaned the steam nozzle with a toothbrush, still didn't resolve the issue. turns out the problem was that the line from the thermal unit to the frother was partially clogged with garbage. after removing the condensation from the line. it is working. could haven't done it without these screwdrivers.

i was looking for something a little bit more than the standard proprietary screwdriver set. most i've seen didn't have what i needed. however, this one came with the screwdriver to open Motorola DVR or any other DVR. I was capable of removing the lock pin from a motorola dcx3510-m dvr and replace it with a new one after repairs. it came with free dvr lock pins. about 3 plastic DVR lock bins are in the tool box. i also repaired a tvr52 sony camcorder with it as well. definitely a great find.

I've tried a few different game bits for my retro game refurbishing business, but they always strip after a few uses. These bits are by far the best I've tried. I've been using them for years with no problems at all. Awesome!

this tool box saved my SNES. without it i don't think i could have defeated the dreaded black screen of death. now that fixing is sorted and console is working. i off to play Harvest Moon. wippy!