Newelectronx Reviews, Rating, and Feedback

i had error on my jura capresso impressa x90 purchased at costco 3.5 years ago. so its fairly out of warranty. to escape the problem i would pull the power plug out the wall for a few minutes to allow the machine to reset. worked perfectly for a long time. the dumping motor started making repeated cycles which was weird and then the error 8 would reappear. it wasn't until i worked out opening the machine and cleaning the sludge built up and dust that i got the machine working at 90% again. thanks for shipping the screwdrivers quickly. that was great help.

okay, i tired the procedure where you turn machine off, turn the main power switch off and unplug machine for at least a minute. turn machine on again. it is supposed to be the solution to clear the error 8 problem. after repeating about 10 times on a jura f70 i couldn't wait any longer. tried taking the capresso impressa to the jura z5 doctor - for fixes. the doc fixes all coffee makers but the service charge started at $200 and that was just to tell me what it was going to take to repair the darn machine. ended ordering the tool and spent a weekend, and solved the error 8 problem for a fraction of the cost.

i used it to dismantle a decodificador jerrold cft2014/v5s8 for parts and then i used it to dismantle a Motorola DCT 6416. has every tool needed.

Kinda hard not to get excited over having screwdrivers for game systems. i had a basic security tool screwdriver set before with not as much bits and it cost almost as much as this one. this is a great little collection of screwdrivers for video game systems. If you need to connect remove hack or modify a gaming console that has security screws around it, then this works perfectly. It's a good gaming tool kit to have that will see multiple uses over the years. Highly Recommended!

great place to order open market mdu and mso supplies. fast shipping also.

Very happy with the quality of the products and service. Definitely will be back for more.

Used distilled water and vinegar to descale my impressa after a series of error 8's. tried to decalcify and error 8 came up again. after a receiving the screwdriver and a few youtube videos i managed to fix my jura.

i needed to take apart the jura impressa f7 and a capresso in order to clean them and reset the cup count. I needed four different torx hexagonal and an oval unique screwdriver bit to remove all the screws. pricing them separately was more than the cost of this screwdriver set that has everything that I needed; and then some. once received i removed oval screws and hexagonal torx screw from the top back and side panels. emptied the bean water and the water tray. with the right screwdrivers i was able to avoid dismantling the coffee grinder and its hopper. this allowed me to keep the hopper rubber seals. All in all the repair went swell and I couldn't have pulled it off without the torx and oval screwdriver. so thank you for that.

Fast shipping to Canada. The star key works great. Cheers.

this gamebit security screwdriver is a great bargains, and worth every penny for all the video consoles that it can open fast shipping and most important the quality of each bit. i am pleasantly surprised with my order. thank you.

opening repairing COX cable boxes is a daily routine. Has anyone opened a DCX3400-M? If you have then you know the little security caps will break. before we can receive credit for a fixed cable box, it is necessary that we don't crack them off. the tampering piece has to be replaced on every refurbished field pull. i like to purchase mine here since they are always new. i used to get them off another guy on the cheap, but his are field pulls and they normally crack upon insertion. and availability was only when he recycled some Motorola cable boxes. these are always in stock. i like the fact that they are brand new and prices here can't be argued with. especially when you buy in bulk.

working for rogers i have used similar terminators that cost almost nothing. the cheaper ones need a can of WD-40 to loosen up the splines. several of them have broken on me; and the filter just spins around the tip. the difference between this one and the other Pronged Terminator Tools is the shaft doesn't twist under high torque. the fins in this one spring back without spraying wd-40 into the shaft. normally the cheap ones last a week or two, so I used to buy about 10 of them. after 3 months of hardcore abuse this pronged terminator still has prongs, that spring back.

i own a computer network cable installation company. i originally approached these fine people in assistance for selecting a proper key tool. i didn't have a cable company name or know which consulting company mounted the telco box that we needed to run cables into. our client wanted us to open the cable box to put another cable inside. i sent over a few pictures to the sales people of the mechanism and viola i was luckily recommended a key that worked. it took about 2 days for delivery which was fine since we had 10 days to finalize the project. overall i am pleased with this company.