Newelectronx Reviews, Rating, and Feedback

Modding the CFT 2200 was straight forward - connected four wires - power 5volts, ground, and two data wires. Didn't really need the fifth wire - works like treat!

This gamebit 64 tool kit works great for getting old consoles open. I have used it to open up the revised NES. We used to call the NES the NES2, NES Top-Loader, or NES-101 - but their all pretty much the same. The original version of the NES does not use this bit to my knowledge that is why this kit is so awesome. It has the security bits to open the original and the newer ones. The other consoles I have used the professional tool kit for is the SNES, Virtual Boy VB, Gameboy GB, Sega Nomad, and the SNES mini. Redesign, cleaning, modding, and fixing is not a problem because this tool kit has the longest 4.5mm gamebit. The bit is long enough to reach into the deeper holes. I have not had any issues with the bits stripping.

The Sega Nomad uses annoying screw called Gamebit. Thus you need this special bit in order to open it. I needed to mod it internally and replace the broken screen. I have just received a pair of the bits 3.8 mm and 4.5 mm. I put them on a screwdriver. I used a regular and electric screwdriver. Guess what? The gamebit actually fit the hole in the back of the Nomad. And the bit actually reached deep into the hole to turn the screw. Viola - it worked!

The Sega Nomad uses annoying screw called Gamebit or system zero. Thus you need this special bit in order to open it. I needed to mod it internally and replace the broken screen. I have just received a pair of the bits 3.8 mm and 4.5 mm. I put them on a screwdriver. I used a regular and electric screwdriver. Guess what? The gamebit actually fit the hole in the back of the Nomad. And the bit actually reached deep into the hole to turn the screw. Viola - it worked!

I bought 2 pieces of the gameing console tool kit. It came with one 3.8 mm size and one 4.5 mm size repair tool. Took apart my console without using a driver - just pushed down a little bit to make sure the tool fit the screw well. Screw spun right off. Was able to modify a cartridge easily and repair N64. Not bad. No complaints only thanks!

GORGEOUS! Better than expected. Would buy from again, much appreciated.

didn't know what to use for the DCT3416i DIGITAL CABLE BOX. the screws were giving me a headache. I need to remove them, but didn't know what tool or bit to use. Found several companies online, emailed them all with questions about which tool would remove the reverse torx screw on the cable box. No oneone seemed to know which torx driver would work except for you guys. BTW the reverse torx driver works GREAT! That is why i consider you a AWESOME GREAT STORE!

THIS STORE IS VERY REASONABLY PRICED FOR MOTOROLA CABLE SCREW REMOVERS

didn't know what to use for the DCT3416i DIGITAL CABLE BOX. the screws were giving me a headache. I need to remove them, but didn't know what tool or bit to use. Found several companies online, emailed them all with questions about which tool would remove the reverse torx screw on the cable box. No oneone seemed to know which torx driver would work except for you guys. BTW the reverse torx driver works GREAT! That is why i consider you a AWESOME GREAT STORE!

Great experience all around. Communicative seller, swift shipping, well-packed and really nice transaction!

Purchase very easy.