Newelectronx Reviews, Rating, and Feedback

Fast shipping to Canada. The star key works great. Cheers.

i needed to take apart the jura impressa f7 and a capresso in order to clean them and reset the cup count. I needed four different torx hexagonal and an oval unique screwdriver bit to remove all the screws. pricing them separately was more than the cost of this screwdriver set that has everything that I needed; and then some. once received i removed oval screws and hexagonal torx screw from the top back and side panels. emptied the bean water and the water tray. with the right screwdrivers i was able to avoid dismantling the coffee grinder and its hopper. this allowed me to keep the hopper rubber seals. All in all the repair went swell and I couldn't have pulled it off without the torx and oval screwdriver. so thank you for that.

Used distilled water and vinegar to descale my impressa after a series of error 8's. tried to decalcify and error 8 came up again. after a receiving the screwdriver and a few youtube videos i managed to fix my jura.

Very happy with the quality of the products and service. Definitely will be back for more.

great place to order open market mdu and mso supplies. fast shipping also.

Kinda hard not to get excited over having screwdrivers for game systems. i had a basic security tool screwdriver set before with not as much bits and it cost almost as much as this one. this is a great little collection of screwdrivers for video game systems. If you need to connect remove hack or modify a gaming console that has security screws around it, then this works perfectly. It's a good gaming tool kit to have that will see multiple uses over the years. Highly Recommended!

i used it to dismantle a decodificador jerrold cft2014/v5s8 for parts and then i used it to dismantle a Motorola DCT 6416. has every tool needed.

okay, i tired the procedure where you turn machine off, turn the main power switch off and unplug machine for at least a minute. turn machine on again. it is supposed to be the solution to clear the error 8 problem. after repeating about 10 times on a jura f70 i couldn't wait any longer. tried taking the capresso impressa to the jura z5 doctor - for fixes. the doc fixes all coffee makers but the service charge started at $200 and that was just to tell me what it was going to take to repair the darn machine. ended ordering the tool and spent a weekend, and solved the error 8 problem for a fraction of the cost.

i had error on my jura capresso impressa x90 purchased at costco 3.5 years ago. so its fairly out of warranty. to escape the problem i would pull the power plug out the wall for a few minutes to allow the machine to reset. worked perfectly for a long time. the dumping motor started making repeated cycles which was weird and then the error 8 would reappear. it wasn't until i worked out opening the machine and cleaning the sludge built up and dust that i got the machine working at 90% again. thanks for shipping the screwdrivers quickly. that was great help.

On my jura impressa f50 model, i had the indication error 8. i was able to insert the tray and the dump box, but when the coffee center would make loud noise I would see the error 8 warning. It would happen several times through out the week. Called the service center and they would instruct me to remove the whole drawer assembly and remove the ground bucket. and then insert the assembly without the ground bucket. this successfully worked the first few times, but then it stopped working. finally had to give in and buy the key to take off the oval screws and panel to clean it. it turns out that being dirty inside the block and the bean hopper sensor glued with gunk. took me about 1 hour to dismantle the machine and another 2 hours to clean out all the coffee grim and calcium. the machine is working great after all that. thanks

I ordered a few of the Motorola Cable TV Box Security Bit Repair Tool for opening Motorola cable receivers; and I must say I am pleased with the fast shipping great price and quality of the items.

I cannot thank-you enough for all of your help. You have been totally terrific!! i love the scientific atlanta cable box model 8600STNN 05. I would not hesitate in making a purchase from you again. Thanks again!

Like that the handle and bits are magnetic.