Newelectronx Reviews, Rating, and Feedback

it was almost impossible to access the brewing unit without removing the jura oval head screws to get to the water tank. the panels had to come off. i ordered this special tool and removed the oval head security screws. after disassemble I lubricated the jura including the o-rings. luckily they were reusable. the brew head of the jura z5 is running smoothly after repairs. Cheers

So I had a Jura Capresso Error 8 problem. The Capresso got stuck in open tap filling system. At the time I had no idea what to do. The only thing I could think of doing was opening the tab. When I did all it would say is filling system, then close tap. When I closed the tap it goes back into open tap. Terrible! From a visual check the Float valve seemed to be working okay and the water was moving - tank water flows? So what gives? Screen on the e-8 inlet wasn't clear. when this would happen i would unplug for 15min to see if i could get lucky with a reset. sometimes it would work and sometimes it wouldn't. making me late for work or embarrassing moments when a guest wanted a cup of java. limited research allowed me to first find this screwdriver set and second - that the open tap and close tap is nothing more than a loop that the jura gets stuck into. because the machine doesn't see any water flow - which is weird, because i saw water flow (or at least) i thought i did. the reason is what i think i had, the water flow wasn't enough when the water pump was on. it was rather slow. also i discovered clearly that the flow sensor was stuck. after taking off the four oval screws and torx screws using the bits - i got to the round white plastic assembly with two water hoses and a electrical connection. it was under the water tank. aw! i took it apart and cleaned out a ton of calcium, coffee sludge, and some slimy mold that was stuck in there. after i was done, the frozen paddles wheels spun freely while blowing into the inlet. i think this would have cost at least $100us to fix in a repair shop.

I like this screwdriver set, it has everything i need when repairing and fixing dcx3200 and dch3200 all in one case. thanks for the fast shipping to Morinville.

this cable box screwdriver tool set has every bit inside that i needed to pry open a cable box. i was very happy with the time that it arrived. it was before schedule. very good transaction.

the best way to remove terminators. wouldn't do it any other way after using this tool. very easy to use. click and spin, done

cant complain. nice product. fast shipping. good service.

as contractor with a small team, we do allot of time warner demarcation boxes and we use the channell tools for residential and commercial fiber, coax, phone, and data. especially on mdu installations both post and pre wiring. recently we had two separate jobs - so i had to split my crew in teams of 2. one project for structured cable systems while the other was for audits/disconnects. i had two order sent to different locations. both arrived fast and on time to get the projects done before the dead lines. im impressed with your attention to send out orders fast. thank you.

we specialize in geospatial tech. in working with commercial industrial and government for economic development community development/redevelopment mapping 911 addressing environmental data management and litigation support - i find it necessary to support my provide my professional group of workers - not only with discipline specific education/experience; but also with the right tool requirements. through my order i have found that you have aided me in continuing to bring exceptional value to my clients. thank you.

on my first i got the wrong slam lock cable box wrench because shapes look almost similar. i didn't know that this was the actual true fit for the pedestal here. thanks for helping me out and the fast shipping, both times.

this tool to removed all of the jura special screws, it does what it says. and the extra drivers are a bonus. :)

the problem started off and on about a few weeks ago. my Capresso LCD stays on displaying that Hot water cycle necessary - needs attention? it would not make coffee. the only thing i could get out of it was a drop of clear water and air. i bought these tools to get pass this brewing stage. this tool set is awesome it had everything i would ever want to dismantle a C1300. once i opened the side panels of the jura machine i could see air pockets in the water line. seemed like the air bubbles were coming from the solenoid through the heater block. i opened the hot water tap, making sure to remove the end of water line connecting directly to the solenoid and heater block. at the solenoid portion of the water line is where i bleed air out. following the air was calcium deposits, coffee brew grounds, and a bit of sludge. putting the machine back together with the screwdriver set i replaced the oval head screws on the back. powered the jura up and ran a few descales. after that i brewed up a few cups and fine tasting espressos.

the right key for the right enclosure lock. fit perfect. as described.

Tried to buy some of these tools in a convenient store and haven't seen better quality in the tools. Super durable and does not break! Happy with choosing this company with buying the tools I need to get any job done.